崇贸烧录器 ，全自动烧录器，烧录面板，IC烧录 ，手动烧录器，烧录座维修，烧录器维修，烧录器租用，烧录座/适配器 T9600 T9800
13776093880
产品分类
Adapter manual
-
Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
-
Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. Then release adapter ZIF socket.
-
Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
-
Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
-
To take out the device push the top of adapter ZIF socket and remove device from it.
-
When you finish work with adapter, remove it from the device programmer ZIF socket.
-
Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
-
For handling with the device we recommended to use a vacuum pick up tool.
-
Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.
Accepted package(s)
- Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
- Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. Then release adapter ZIF socket.
- Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
- Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
- To take out the device push the top of adapter ZIF socket and remove device from it.
- When you finish work with adapter, remove it from the device programmer ZIF socket.
- Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
- For handling with the device we recommended to use a vacuum pick up tool.
- Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.
| SOIC8 |
|
181 1567 7929
版权所有苏州浦旭电子科技有限公司 苏ICP备19066247号-1
可提供业务范围：崇贸烧录器 ，烧录器，全自动烧录器，烧录面板， IC代工烧录， IC烧录 ，手动烧录器，烧录座维修，烧录器维修，回收二手烧录器，二手烧录器出售，烧录器租用
